Intel Galileo Gen-2 board

The Intel® Galileo Gen2 is a board based on the Intel® Quark™ SoC X1000, a 32-bit Intel® Pentium® processor-class system on a chip (SoC), operating at speeds up to 400MHz.

The Quark processor supports the Yocto 1.4 Poky Linux distribution.

The board has built-in Ethernet with support for Power Over Ethernet(PoE), a USB 2.0 Host Port, micrso-SD slot, PCI Express mini-card slot, 20 digital input/output pins (of which 6 can be used as PWM outputs with 8/12-bits of resolution and 6 as analog inputs with 12 bits of resolution), a micro USB connection, an ICSP header, a JTAG header, and 2 reset buttons.

There is also an integrated Real Time Clock (RTC), with an optional 3V “coin cell” battery for operation between turn on cycles.

The Intel® Galileo Gen2 supports shields that operate at either 3.3v or 5v. The board is designed to be hardware and software pin-compatible with Arduino shields designed for the Uno R3. Digital pins 0 to 13 (and the adjacent AREF and GND pins), Analog inputs 0 to 5, the power header, ICSP header, and the UART port pins (0 and 1), are all in the same locations as on the Arduino Uno R3.